Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Tygon 3370 I.B. Reinforced Platinum-Cured Silicone, 1/4"" ID x 1/2"" OD; 50 ft
Formulation: Tygon 3370 I. B., silicone, platinum cured. Applications: Demanding sanitary high-pressure pharmaceutical, biotechnology, food and beverage, and cosmetic applications. Characteristics: Excellent heat resistance, low compression set, odorless, and nontoxic. Translucent. Certification: Elastomer is FDA-compliant (21 CFR 177.2600) and USP Class V extractables; exceeds Class VI implant; exceeds 3A Sanitary Standards; produced to Bulk Pharmaceutical cGMPs (FDA 21 CFR 210, 211). Tubing manufactured according to GMP Temperature range: ¿60 to 320¿F (¿51 to 160¿C) Sterilize: With autoclave, ethylene oxide, or gamma irradiation.
Thomas Scientific Industrial Polyurethane High Bench Height Chair with Black N
Industrial Polyurethane High Bench Height Chair with Black N
Perkin Elmer US LLC 1.0 mm I.D. PTFE Tubing, Qty. 1 m
Other tubing with 0.35 mm - 1.75 mm I.D. available separately.
Hach Company Hach Flare Flow Cell Carrier Line, 35 cm - replacement carrier line for Lachat flow cell assemblies
The Hach Flare Flow Cell Carrier Line (35 cm) is a replacement carrier line used with flow cell assemblies in flow injection analysis equipment. It provides the specified 35 cm length carrier line for positioning a flow cell within the analysis path.
- 35 cm length.
- Flow cell carrier line for flow cell assemblies.
- Replacement part for flow injection analysis systems.
- Provides a consistent carrier length for repeatable positioning of the flow cell.
Pacer Global LLC Saint-Gobain - SaniTech Ultra-C Tubing, 0.125'' ID, 0.1875'' OD, 0.03125'' Wall, 50 Foot Coil, 1/EA - ULTRA-C-125-1F
Saint-Gobain - SaniTech Ultra-C Tubing, 0.125" ID, 0.1875" OD, 0.03125" Wall, 50 Foot Coil, 1/EA
AVANTOR MASTERFLEX (VWR LLC) 2-STP CHMDRNCE BIO 0.89MM 6PK
Masterflex Ismatec Pump Tubing, 2-Stop, Chem-Durance Bio, 0.89 mm ID; 6/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Metric PTFE, 6.22 mm ID x 8.00 mm OD; 25 ft
Applications: Demanding lab, chemical, electrical, mechanical, pharmaceutical, and automotive applications. Good for high-purity work. PTFE tubing withstands extreme temperatures. Characteristics: Chemically inert, nontoxic, and virtually nonporous. Excellent crack- and stress-resistance. Low coefficient of friction. Translucent. Resin certification: Resin is FDA-compliant (21 CFR 177.1550); meets USP 23 Class VI requirements. Tubing is manufactured according to GMP. Temperature range: -400 to 500¿F (-240 to 260¿C) Sterilize: With autoclave, ethylene oxide, or use dry heat.